MrArgus
MrArgus.exe --- A bot to auto-warp you to NM pop's.
This program is very easy to use, and actually exists of two programs. The first program is called NPC.exe, and the second one, the real bot, is called MrArgus.
Here is explainations with pictures of the programs:
NPC
This program is to see which "NPC" you can/want to warp to.
You simply press the Start button, and everything targetable except players will appear in a list. This picture shows me using it on an airship. On the left side are the ID numbers of the NPC's. You can also warp to door's and so on. Also, dead mob's will also appear in the list! If you get near a NM area, and it's dead, it will appear with 0% in the list! Same for Garrison mob's, etc. etc. Also something I noticed, is that some Cutscene NPC's such as Eshant'Arl, the Archduke in the Audience Chamber in Ru'Lude Gardens appear as well! Anyway, you note down or copy the ID, and put it into the next program..
MrArgusGUI.exe
This program is what allows you to actually warp to it!
Instructions:
When you have the ID number of a NPC you want to warp to, you put it in the program, click on the "Add" button and it appears in the list which you can see in the second picture. Then you make sure the "Freq", "Rise" and "Wait" are set to the numbers as in the picture. Why? I don't know to be honest. But it's probably good. Then you Enable the "Warp On" option, and click on "Start". Make sure you're not getting blocked by any high walls and stuff. Now just wait till it pops. ^^ If you haven't turned NPC.exe off, it will appear on there with 100% at the bottom when it(the NPC/NM) does pop.
Button's List:
Start - Starts the program.
Stop - Stop's it. Can simply press the X button or Alt+F4 as well.
Add - Add's new NPC in the list after a new ID + Name have been entered.
Del - Delete the currently selected NPC from the list.
Repeat On - I'm not sure, I think it pop's you on top of the NPC over and over once it pops, probably good against wall's, sometimes you automatically jump over the wall when you warp multiple times.
Warp On - If enabled, warps you to on top of the NPC once it pops, when the program is Started.
To Mob - Instantly warps you to the selected NPC when near, no matter if it's dead or not. When it's dead, it warps you to the spot where it last died.
Draw Near - This function is a bit weird, but if the selected NPC is alive/popped, then it draws it near you, you can even target it, but not attack. So it looks like as if it's standing infront of you. Funny but weird.
Macro, Alt, Ctrl and 0-9 numbers list This allows you to set the program to automatically use one of your macro's when being warped to the NPC. Note: Sometimes, the popped NPC does not appear in your Target, so any macros like /ma "Dia" <t> won't have any effect. Also notice that if you attack the NPC too fast, you won't be able to do anything at all for a certain amount of time. This is done by Square-Enix do prevend botting. Usually you're not that fast though.
Note 1: If you're not invisible when being warped to a NPC, other players will see, and nothing more, that you suddenly appear in the air on top of the NPC.
Note 2: Don't get confused by when I say NPC/NM, i basically mean any kind of NPC, character, mob or NM etc.
Things you can do with this program
- Auto-warping on top of NM's as soon as they pop. Mainly.
- Find Treasure Chest's and other things in NPC.exe, and instantly warp to it.
- When searching for any NPC, you can easily find them with NPC.exe and use it with MrArgus.exe, such as warping to quest-NPC and stuff.
- Get free airship rides :P. Simply warp to the NPC behind the door at the docks, the one that tells you how long to wait before airship arrives.
- Get into area's you normally can't go and walk freely in.
Here's a picture of me in the Audience Chamber. I found Door: Audience Chamber in NPC.exe, while standing infront of the door i used it and popped on top of the door, then i simply could walk through the wall over the door and fall into the audience chamber.
MrArgus.exe --- A bot to auto-warp you to NM pop's.
This program is very easy to use, and actually exists of two programs. The first program is called NPC.exe, and the second one, the real bot, is called MrArgus.
Here is explainations with pictures of the programs:
NPC
This program is to see which "NPC" you can/want to warp to.
You simply press the Start button, and everything targetable except players will appear in a list. This picture shows me using it on an airship. On the left side are the ID numbers of the NPC's. You can also warp to door's and so on. Also, dead mob's will also appear in the list! If you get near a NM area, and it's dead, it will appear with 0% in the list! Same for Garrison mob's, etc. etc. Also something I noticed, is that some Cutscene NPC's such as Eshant'Arl, the Archduke in the Audience Chamber in Ru'Lude Gardens appear as well! Anyway, you note down or copy the ID, and put it into the next program..
MrArgusGUI.exe
This program is what allows you to actually warp to it!
Instructions:
When you have the ID number of a NPC you want to warp to, you put it in the program, click on the "Add" button and it appears in the list which you can see in the second picture. Then you make sure the "Freq", "Rise" and "Wait" are set to the numbers as in the picture. Why? I don't know to be honest. But it's probably good. Then you Enable the "Warp On" option, and click on "Start". Make sure you're not getting blocked by any high walls and stuff. Now just wait till it pops. ^^ If you haven't turned NPC.exe off, it will appear on there with 100% at the bottom when it(the NPC/NM) does pop.
Button's List:
Start - Starts the program.
Stop - Stop's it. Can simply press the X button or Alt+F4 as well.
Add - Add's new NPC in the list after a new ID + Name have been entered.
Del - Delete the currently selected NPC from the list.
Repeat On - I'm not sure, I think it pop's you on top of the NPC over and over once it pops, probably good against wall's, sometimes you automatically jump over the wall when you warp multiple times.
Warp On - If enabled, warps you to on top of the NPC once it pops, when the program is Started.
To Mob - Instantly warps you to the selected NPC when near, no matter if it's dead or not. When it's dead, it warps you to the spot where it last died.
Draw Near - This function is a bit weird, but if the selected NPC is alive/popped, then it draws it near you, you can even target it, but not attack. So it looks like as if it's standing infront of you. Funny but weird.
Macro, Alt, Ctrl and 0-9 numbers list This allows you to set the program to automatically use one of your macro's when being warped to the NPC. Note: Sometimes, the popped NPC does not appear in your Target, so any macros like /ma "Dia" <t> won't have any effect. Also notice that if you attack the NPC too fast, you won't be able to do anything at all for a certain amount of time. This is done by Square-Enix do prevend botting. Usually you're not that fast though.
Note 1: If you're not invisible when being warped to a NPC, other players will see, and nothing more, that you suddenly appear in the air on top of the NPC.
Note 2: Don't get confused by when I say NPC/NM, i basically mean any kind of NPC, character, mob or NM etc.
Things you can do with this program
- Auto-warping on top of NM's as soon as they pop. Mainly.
- Find Treasure Chest's and other things in NPC.exe, and instantly warp to it.
- When searching for any NPC, you can easily find them with NPC.exe and use it with MrArgus.exe, such as warping to quest-NPC and stuff.
- Get free airship rides :P. Simply warp to the NPC behind the door at the docks, the one that tells you how long to wait before airship arrives.
- Get into area's you normally can't go and walk freely in.
Here's a picture of me in the Audience Chamber. I found Door: Audience Chamber in NPC.exe, while standing infront of the door i used it and popped on top of the door, then i simply could walk through the wall over the door and fall into the audience chamber.
No comments:
Post a Comment